Click here for Brochure
Vitap Eclipse 4.0 Semi Automatic Contour Edgebander
SPECIFICATIONS:
- For shaped "concave, convex" and straight panels 10-60 mm (edging) thickness 1-3 mm band thickness
- Teflon coated glue station (EVA glue) glue pot 1kg
- Quick Removal glue pot system
- Glue and tape application on big and small shaped panels
- Equipped with glue pot with 1 Kg capacity
- 2 rollers to copy the shape of the piece
- -1 tilting support roller to enable the exit of the panel after banding
- Set up of the glue temperature
- Automatic guillotine for coiled material up to 3 mm x 45 mm
- Three types of operations:
- By Encoder
- By Encoder + laser
- By Encoder to overtake the tape to cut it and to heat it
- New laser system for precision cutting to band closed pieces
- Slowing-down feeding speed by foot pedal and laser with external potentiometer and 0,37 motor
- Color Touchscreen 10”
- Trimming station with pneumatic tilting, to allow edge banding of big pieces;
- Trimming unit with 2 motors 0,5 Kw high frequency 15000 RPM with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
- 2 brazed cutters R=3, Z=6
- Raisable working table for small panels
- Holding arm with vacuum table to hold the big panels for edging and trimming
- Dimensions: 2000 x 2000 x 1700 mm • Kg 600
-
- Reinforced support arm
ELECTRICAL DATA:
- E-Stop on main control panel
-
Service, 230 V – 3 Ph – 60 Hz
|
TECHNICAL DATA:
|
|
· Coil holder diameter
|
780 mm
|
(30.7”)
|
|
· Panel thickness
|
10-60 mm
|
(0.39 – 2.36”)
|
|
· Max strip edge thickness
|
3 mm
|
(0.12”)
|
|
· Min internal radius (concave)
|
50 mm*
|
(2”)
|
|
· Max external radius (convex)
|
2700 mm*
|
(106.3”)
|
*All Min and Max radius are affected by the tape thickness, quality and adhesive used.
MACHINE FEATURES
Large Touch screen controller 10” + job list.
Vacuum is provided via a rotating vacuum table ø 200 mm.
Laser: Measurement to assist encoder for more accurate joint of the tape.
Reinforced joint arm and heavy duty frame construction.
Slow down feeding speed for complex panel. Laser for automatic + variable speed adjustment by potentiometer.
Trimming station with pneumatic tilting for execution of big pieces.
Glue pot teflon coated 1 Kg.
Holder for edgebanding complete with three feet.
Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:
- 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.
- Large Touch screen controller 10” + job list.
Vacuum is provided via a rotating vacuum table ø 200 mm.
Laser: Measurement to assist encoder for more accurate joint of the tape.
Reinforced joint arm and heavy duty frame construction.
Slow down feeding speed for complex panel. Laser for automatic + variable
speed adjustment by potentiometer.
Trimming station with pneumatic tilting for execution of big pieces.
Glue pot teflon coated 1 Kg.
Holder for edgebanding complete with three feet.
Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:
- 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.
