| /

The joint veneer and panel saw is suitable for joint-tight, splinter-free cutting of:
Veneers, plastics, plastic coated panels, acrylic, wood materials, light metals and cardboard (other materials on request).

Standard equipment:

  • With automatic processing sequence by PLC control
  • Milling unit for a perfect cutting kerf
  • Electromotorical feed
  • Double linear guiding
  • 4 HM inserts
  • Pneumatic saw blade adjustment (automatic), adjustment range 2 mm
  • Pneumatic pressure beam (automatic)
  • Pneumatically movable supporting table
  • Rack and pinion compensator to prevent the pressure beam from tilting
  • Transparent safety cover over the complete cutting length (also a splinter shield)
  • Machine is equipped with tools and filter pressure regulator

Optional equipment:

  • Format table
  • Digital measure displays
  • Parallel stop
  • Handwheel adjustment for parallel stop
  • Chipping unit

Standard incl: milling unit, automatic saw blade adjustment, and size correction

Digital measure display
  • Electronic measure display for format table with manually adjustable parallel stop.
  • Fast and accurate adjustment of the stop depth.
  • Simple operation, large digit height and simple offset changeover.
  • Switching from absolute to chain dimensions for strip cutting, taking into account the saw blade thickness.
  • Simple, clear arrangement of the entire adjustment device.
  • Storage of parameters when the machine is switched off.
Saw and milling combination with electric feed

Pneumatically lifting and lowering of saw and milling unit (3 steps).
The saw and milling unit can be raised and lowered separatically.
Prepared for connection on an existing extraction system.
The machine is equipped with tools and filter pressure regulator.

Hand wheel adjustment

Mechanical adjustment of the parallel stop via a hand wheel.

Control console

Very clear arrangement of the most important operating units for rational and ergonomic working with the machine.

Movable supporting table

Manually movable or with pneumatic control. The front support table is moved manually forwards or backwards when using the milling unit.

Format table

Cutting depth: 20 – 560 mm

Format table for processing veneers with parallel stop (parallel guide), inserted tape measure and pneumatic lock for parallel stop.

Parallel stop

One-stage or double-stage lowerable for fast and efficient work run.

Format table

Pneumatically lowerable stops for a stop depth of 800 mm.

TECHNICAL DATA

Cutting and milling height
40 mm
Motor power saw
2.2 kW

Rotation speed saw blade
approx. 10000 rpm
Diameter saw blade
Ø 200 mm
Motor power milling unit
1,1 kW
Rotation speed milling cutter
approx. 10500 rpm
Dimension of milling cutter(aØ x H x iØ)
85 / 50 / 30 mm
Motor power feed
0.18 kW
Feed speed
2-25 m/min

Extraction diameter
Ø 140 mm

Air velocity
≥ 20 m/s

Volume flow (at 20 m/s)
1000 m³/h

Suction vacuum (at 20 m/s)
1780 Pa

Required air pressure
6 bar

Total connected load
4.2 kW

Operating current
12 A

Operating voltage
3 x 400 V + N + PE / 50 Hz


Cutting and milling length 3050 mm

Required space without format table (L x W): approx. 4550 x 1100 mm
Required space with all options (L x W): approx. 4550 x 1550 mm
Weight without format table: approx. 1050 kg
Weight with all options: approx. 1200 kg

Cutting and milling length 3500 mm

Required space without format table (L x W): approx. 5000 x 1100 mm
Required space with all options (L x W): approx. 5000 x 1550 mm
Weight without format table: approx. 1150 kg
Weight with all options: approx. 1300 kg

Cutting and milling length 4000 mm

Required space without format table (L x W): approx. 5500 x 1100 mm
Required space with all options (L x W): approx. 5500 x 1550 mm
Weight without format table: approx. 1250 kg
Weight with all options: approx. 1400 kg


Stay connected with our newsletter