AUTOMATIC BORING CENTER WITH SAW BLADE
Computerized CNC drilling centre with fix working table and movable part for following machining:
Machine frame and working table
Beam and operating unit
FB0728 Air conditioning system for the electrical cabinet
The system allows the temperature inside the electrical cabinet to be
maintained at a suitable level and guarantees a dust free environment.
FB0934 Electrospindle 6Hp with Quick Tool Change
Electrospindle, positioned vertically to the working table, with quick tool change, able to carry out routing in any direction.
FB1438 Power supply with voltage other than 380/400 Volt - 50/60 Hz
The machine is equipped with autotransformer that converts the value of the mains voltage into the value of the electrical voltage that is necessary for machine function. The instructions for a correct
electrical connection of the machine to the customer network are supplied with the machines documents.
The supply of a transformer/auto transformer is ALWAYS to be understood as:
Note: The auto transformer includes the connection of the neutral
for the generation of 220V inside the electric panel
Distribution systems admitted: type TN-S / TN-C
FB0994 Remote push button panel
Remote push button panel for machine control during execution of the programs. Very useful for checking the milling programs. It allows control of axis speed and machine status. Complete with emergency button.
Note: It is not possible to process the external panel side where it has
the movable clamp.
Min. distance between tool and external panel side (clamp side): 35 mm
Tools rotation speed limited to 18.000 rpm.
|Max. panel length||3.050 mm|
|Min. panel length||200 mm|
|Max. panel width *||900 mm|
|Min. panel width||70 mm|
|Max. panel thickness||60 mm|
|Min. panel thickness||10 mm|
|Max. speed X axis||40 mm|
|Max. speed Y axis||40 mm|
|Vertical spindles||12 (7X - 5Y)|
|Horizontal spindles||6 (2+2X – 2Y)|
|Spindles rotation speed||4.200 rpm|
|Integrated saw in X||125 mm|
|Blade rotation speed||5.400 rpm|
|Motor power||2,2 kW|
|Cylindrical tool attachment||Ø 10 mm|
|Standard power (S6)||4.5kW / 7Hp|
|Max. Speed||24,000 rpm|
|Max. tool diameter||20 mm|
|Installation (approximate values)|
|Installed power||17 kVA|
|Compressed air consumption (1 plug)||450 NL/cycle|
|Dust Extraction air speed||30 m/sec|
|Extraction hood diameter||Ø 150 + 80|
|Total machine weight||1,350 kg|
The “Wave” Numerical Control has been specially studied for managing boring and routing machine functions for the woodworking sector, installed on a PC :
Main Software features:
FB0706 Additional Hardware key for “Wave”
Note: if the Internet connection is not allowed by the customer during
the warranty period , even though specific intervention is requested at
the customer's premises, and should it be found that the problem could
have been resolved by tele-service via internet, then the service
intervention will have to be paid for.